IT-Technician

Interview Questions for Networking

When were OSI model developed and why its standard called 802.XX and so on?

OSI model was developed in February1980 that why these also known as 802.XX Standard (Notice 80 means ==> 1980, 2means ==> February)

What is Full form of ADS?

Active Directory Structure

How will you register and activate windows?

If you have not activated windows XP, you can do so at any time by clicking the windows Activation icon in the system tray to initiate activation. Once you have activated windows XP, this icon disappears from the system tray.
For registration
Start ==> Run ==> regwiz /r

Where do we use cross and standard cable?

Computer to computer ==> cross
Switch/hub to switch/hub ==>cross
Computer to switch/hub ==>standard

How many pins do serial ports have?

In computer it's known as com port and could be available in 9pin or 25 pin. On router it have 60 pins.

How will check ip address on 98?

Start ==> Run ==> command ==> winipcfg

How will you make partition after installing windows?

My computer ==> right click ==> manage ==> disk management ==>
select free space ==> right click ==> New partition

What is IP?

It's a unique 32 bits software address of a node in a network.

What is private IP?

Three ranges of IP addresses have been reserved for private address and they are not valid for use on the Internet. If you want to access internet with these address you must have to use proxy server or NAT server (on normal cases the role of proxy server is played by your ISP.).If you do decide to implement a private IP address range, you can use IP addresses from any of the following classes:
Class A 10.0.0.0 10.255.255.255
Class B 172.16.0.0 172.31.255.255
Class C 192.16.8.0.0 192.168.255.255

What is public IP address?

A public IP address is an address leased from an ISP that allows or enables direct Internet communication.

What's the benefit of subnetting?

Reduce the size of the routing tables.
Reduce network traffic. Broadcast traffic can be isolated within a single logical network.
Provide a way to secure network traffic by isolating it from the rest of the network.

What are the differences between static ip addressing and dynamic ip addressing?

With static IP addressing, a computer (or other device) is configured to always use the same IP address. With dynamic addressing, the IP address can change periodically and is managed by a centralized network service

What is APIPA?

Automatic private IP addressing (APIPA) is a feature mainly found in Microsoft operating systems. APIPA enables clients to still communicate with other computers on the same network segment until an IP address can be obtained from a DHCP server, allowing the machine to fully participate on the network. The range of these IP address are the 169.254.0.1 to 169.254.255.254 with a default Class B subnet mask of 255.255.0.0.

What are the LMHOSTS files?

The LMHOSTS file is a static method of resolving NetBIOS names to IP addresses in the same way that the HOSTS file is a static method of resolving domain names into IP addresses. An LMHOSTS file is a text file that maps NetBIOS names to IP addresses; it must be manually configured and updated.

What is DHCP scope?

A scope is a range, or pool, of IP addresses that can be leased to DHCP clients on a given subnet.

What is FQDN?

An FQDN contains (fully qualified domain name) both the hostname and a domain name. It uniquely identifies a host within a DNS hierarchy

What is the DNS forwarder?

DNS servers often must communicate with DNS servers outside of the local network. A forwarder is an entry that is used when a DNS server receives DNS queries that it cannot resolve locally. It then forwards those requests to external DNS servers for resolution.

Which command will you use to find out the name of the pc in networks?

NSLOOKUP [192.168.0.1]
[Ip of target computer]

How will enable sound service in 2003?

By default this service remain disable, to enable this service
Start ==> administrative tools ==> service ==> windows audio ==> start up type ==> automatic

How will enable CD burning service in 2003?

By default this service remain disable, to enable this service
Start ==> administrative tools ==> service ==> IMAPI CD burning com service ==> start up type ==> automatic

Collections of networking interview questions

What is remote desktop?

A feature that's allow user to manage computers remotely.
On server side
My computer ==> properties ==> remote ==> Tick mark on this check box allow user to connect this computer remotely ==> select user.
On client
start ==> program ==> accessories ==> communication ==> remote desktop ==> Server ip ==> user name and password configured on server.
Role of server side can be played only by XP professional or server2003.

How will you make dial-up connection ?

Physical installation of modem ==> install modem driver ==> my network place ==> properties ==> Make new connection ==> next ==>connection to internet ==> setup my connection manually ==> Connect using a dial up modem

How will you share printer ?

Install local printer on that pc which has physically attached printer. And then Right click on it ==> share ==> In xp if you run small office set wizard it will be share automatically. On all other PC install network printer. While installing printer choose network printer.

How will you configure broadband ?

There are two type of broadband available

One that required user name and password to connect the internet like BSNL or Reliance for this type of connection Physical installation of modem ==> my network place ==> properties ==> Make new connection ==> next ==> connection to internet ==> setup my connection manually ==> Connect using a broadband connection that requires a user name and password ==> ISP name ==> User name and password ==> add a short cut to desktop
If you are using other type of connection like Airtel for this type of connection you don't required any additional configuration
If DHCP is enable in modem
IP address and DNS setting will be automatically configure.
If DHCP is not enable then set it manually as given ip by provider

What is minimum requirement of RAM for installation of XP?

64 MB

What is firewall?

The primary method for keeping a computer secure from unauthorized user. A firewall allows or blocks traffic into and out of a private network or the user's computer. Firewalls are widely used to give users secure access to the Internet as well as to separate a company's public Web server from its internal network.
XP pack 2 has a built in firewall that is enabled by default. To change the setting of it use this path
Local area network ==> properties ==> advance ==> setting

What is Active Directory?

Active Directory is a network-based object store and service that locates and manages resources, and makes these resources available to authorized users and groups. An underlying principle of the Active Directory is that everything is considered an object—people, servers, workstations, printers, documents, and devices. Each object has certain attributes and its own security access control list (ACL).

Workers are not able to print from the printer, there user logon are correct and are allowed to print from that printer in active directory. How would you resolve this issue?

Verify printer is set as default.
Verify users have local privileges set properly to print.
Is print server delivering correct drivers.
Is local naming convention for printer correct.
If pre Win2000 workstation, naming convention must be less than 12 characters.
Make sure no viruses present. Some Viruses can shut down IPC shares and printing services.

Where are the Windows NT Primary Domain Controller (PDC) and its Backup Domain Controller (BDC) in Server 2003?

The scheme of PDC and BDC is replaced by The Active Directory in server 2000 and further. Now all domain controllers share a multi master peer-to-peer read and write relationship that hosts copies of the Active Directory.

How can group policy be refreshed?

Restart the server
Leave the server ideal for 90 minute
Run ==> gpupdate (server 2003 only)

What is LILO?

LILO stands for Linux boot loader. It will load the MBR, master boot record, into the memory, and tell the system which partition and hard drive to boot from.

I can't seem to access the Internet, don't have any access to the corporate network and on IP configuration on my address is 169.254.*.*. What happened?

The 169.254.*.* net mask is assigned to Windows machines running 98/2000/XP if the DHCP server is not available. The name for the technology is APIPA (Automatic Private Internet Protocol Addressing).

We've installed a new Windows-based DHCP server, however, the users do not seem to be getting DHCP leases off of it.

The server must be authorized first with the Active Directory.

What's the difference between local, global and universal groups?

Domain local groups assign access permissions to domain groups for local domain resources. Global groups provide access to resources in entire domains.

What's the major difference between FAT and NTFS on a local machine?

FAT and FAT32 provide no security over locally logged-on users. Only native NTFS provides extensive permission control on both remote and local files.

What is presentation layer and how it is responsible for in the OSI model?

The presentation layer establishes the data format prior to passing it along to the network application's interface. TCP/IP networks perform this task at the application layer

Networking Interview Question With Answer

What is difference between packet switch and circuit switch network?

To make a baseband network practical for many computers to share, the data transmitted by each system is broken up into separate units called packets. When your computer transmits data it might be broken up into many packets, and the computer transmits each packet separately. When all of the packets constituting a particular transmission reach their destination, the receiving computer reassembles them back into original data. This is the basis for a packet-switching network.

Circuit-switching means that the two systems wanting to communicate establish a circuit before they transmit any information. That circuit remains open throughout the life of the exchange, and is only broken when the two systems are finished communicating. Circuit switching is more common in environments like the public switched telephone network (PSTN), in which the connection between your telephone and that of the person you're calling remains open for the entire duration of the call.

What is difference between Half-Duplex and Full-Duplex Communications?

In half-duplex communication data travels in only one direction at a time.

In full-duplex mode two systems that can communicate in both directions simultaneously are operating.

Which is the most popular international cable standard?

TIA/EIA-568-B

Describe UTP cable

UTP cable comes in a variety of different grades, called "categories" by the Electronics Industry Association (EIA) and the Telecommunications Industry Association (TIA), the combination being referred to as EIA/TIA.

Cat 1 :- Used for voice-grade telephone networks only; not for data transmissions
Cat 2 :- Used for voice-grade telephone networks
Cat 3 :-Used for voice-grade telephone networks, 10 Mbps Ethernet, 4 Mbps Token Ring,
Cat 4 :-Used for 16 Mbps Token Ring networks
Cat 5 :-Used for 100BaseTX Fast Ethernet, SONet, and OC-3 ATM
Cat 5e:- Used for Gigabit (1000 Mbps) Ethernet protocols

What is TIA/EIA?

A cooperative trade association responsible for the "Commercial Building Telecommunication Cabling Standard," also known as EIA/TIA 568, which specifies how network cables should be installed in a commercial site.

What is attenuation ?

The progressive weakening of a signal as it travels over a cable or other medium. The longer the distance a signal travels, the weaker the signal gets, until it becomes unreadable by the receiving system

What is Crosstalk ?

A type of signal interference caused by signals transmitted on one pair of wires bleeding over into the other pairs. Crosstalk can cause network signals to degrade, eventually rendering them unviable.

Where would you use cross and straight cable?

A straight-through cable is used for DTE-to-DCE connections.

1. A hub to a router, PC, or file server
2.A switch to a router, PC, or file server

Crossover cables should by used when you connect a DTE to another DTE or a DCE to another DCE.

1. A hub to another hub
2. A switch to another switch
3. A hub to a switch
4. A PC, router, or file server to another PC, router, or file server

Describe different types of connector used in LAN

RJ-11 ( Registered Jack-11) a four- or six-wire connector primarily used to connect telephone equipment.

RJ-45 (Registered Jack-45) connector is an eight-wire connector that is commonly used to connect computers to a local area network (LAN), particularly Ethernet LANs.

AUI( Attachment Unit Interface.) is the part of the Ethernet standard that specifies how a Thicknet cable is to be connected to an Ethernet card. AUI specifies a coaxial cable connected to a transceiver that plugs into a 15-pin socket on the network interface card (NIC).

BNC stand for British Naval Connector (or Bayonet Nut Connector or Bayonet Neill Concelman)a type of connector used with coaxial cables such as RG-58.BNC connectors are used on both Thicknet and Thinnet.

What is protocol?

A set of standards that define all operations within a network. There are various protocols that operate at various levels of the OSI network model such as transport protocols include TCP.

Who develop the OSI modal?

The International Organization for Standardization (ISO) developed the Open Systems Interconnection (OSI) Reference Model to describe how information is transferred from one machine to another.

What is Micro segmentation?

Micro segmentation is a term used with switches when each networking device has its own dedicated port on a switch.

What are the advantages of OSI modal?

Defines the process for connecting two layers, promoting interoperability between vendors.
Separates a complex function into simpler components.
Allows vendors to compartmentalize their design efforts to fit a modular design, which eases implementations and simplifies troubleshooting

What are the port number / socket number and Connection Multiplexing?

Transport layer assigns a unique set of numbers for each connection. These numbers are called port or socket numbers TCP, and UDP, provide a multiplexing function for a device: This allows multiple applications to simultaneously send and receive data.

Lan Card Test Sheet
Also know as Ethernet Card, or NIC Network interface card.
In device manage	Reason	In LAN card properties
Yellow sign	Driver not installed	Will not show
Red Cross	Disable	Show with disable status
No Ethernet option	Physical not installed	Will not show
At Command Prompt
C:/> ipconfig Possible out put
	IP address of computer	Everything is fine
	Windows ip Configuration	Either media is disconnected or LAN disable
C:/> ping <Remote computer ip>
Used to check the physical connectivity
Possible out put
	Reply From .....	Host is up and operational
	Request time out	Either firewall is on remote desktop or network plug is loose
	Destination net unreachable	There is no route to reach to the remote network

Networking questions and answers

Explain hidden shares. How do they work?

hidden or administrative shares are share names with a dollar sign ($) appended to their names. Administrative shares are usually created automatically for the root of each drive letter. They do not display in the network browse list.

Name of seven layers in Open System Interconnection model.

They are Application, Presentation, Session, Transport, Network, Data link, and Physical.

What is the difference between ARP and RARP?

The address resolution protocol (ARP) is used to associate the 32 bit IP address with the 48 bit physical address, used by a host or a router to find the physical address of another host on its network by sending a ARP uery packet that includes the IP address of the receiver.
The reverse address resolution protocol (RARP) allows a host to discover its Internet address when it knows only its physical address.

What is Client/Server?

Clients and Servers are separate logical entities that work together over a network to accomplish a task. Many systems with very different architectures that are connected together are also called Client/Server.

What is MAC address?

It is the 48 bit hardware address of LAN card. MAC address is usually stored in ROM on the network adapter card and it is unique.

What are the perquisites to configure server?

LAN card should be connected:
Root (partition on which window is installed) should in NTFS
Server should be configured with a static IP address

How we will configure ADS?

Start ==> RUN ==> DCPROMO

How will you test LAN card?

Ping 127.0.0.1
If getting reply its fine

What are the difference between DOMAIN and WORKGROUP?

Workgroup:-
(i)Every PC is responsible for its security own.
(ii)No centralize administration
(iii)Main aim to save hardware recourse
(iv)Best suite in school, training institute, cyber café
Domain: -
(i)Server is responsible for data safety.
(ii)Centralize administration
(iii)Main aim is to secure data
(iv)Best suite in company environments

Which command is used to check the IP address of your system?

ipconfig

Which set wizard will run to do peer to peer networking in XP?

Small home and office setup wizard

Which command is used to check the physical connectivity between two computers?

Ping

What is map drive?

A special feature that will map network resource to my computer.

What is Proxy Server?

Most large businesses, organizations, and universities these days use a proxy server. This is a server that all computers on the local network have to go through before accessing information on the Internet. By using a proxy server, an organization can improve the network performance and filter what users connected to the network can access.

Which folder contains ADS installed on server?

NTDS

What is the full form of Internet?

International Networking

Which are the bootable files of 98 and XP ?

In windows98 it is command.com
In XP it is NTLDR

In which partition Linux is installed ?.

Linux doesn’t support windows file system that contain partition scheme. It (Linux) has its own file system known as ext2, and ext3. it will install only on it.In linux file system it will install on / (root) partition.

What is size of SWAP ?

It’s the hard disk space that is used as RAM for fast processing. In window it’s known as virtual memory and could be set as per retirement via this path
My Computer ==> properties ==> advance
In Linux it’s known as SWAP space and generally taken the double size of physical RAM For example if you have 256 (MB) DDR physical ram then swap space would be 512 MB.

What is full form of C.M.O.S ?

Complementary metal oxide semiconductor

How will you check ip address without using network place ?

Start ==> Run ==> Command ==>ipconfig

What is IP?

Internet Protocol (IP) is an unreliable, best effort delivery, connection-less protocol used for transmitting areceiving data between hosts in a TCP/IP network

Networking questions to ask

What are the differences between FAT and NTFS ?

FAT	NTFS
Doesn't provide local security	Provide local security
Doesn't provide disk quota	Provide disk quota
Doesn't provide file compression	Provide file compression
Doesn't provide other security feature	Provide other security feature

Difference between XP home and XP professional ?

Feature that is not available in XP home edition
Remote Desktop
Off line file and folder
Encrypting file system
Group policy
Roaming profile
Remote installation
Joining Domain
The features listed above are only available in XP professional

Which OSI layer does IP belong?

IP belongs to the Network Layer (layer 3) in the OSI model.

What is a subnet mask?

Subnet mask is a 4 byte (32 bit) number used to identify the sub-network ID and the host ID from an IP address. All the hosts in a sub-network will have the same subnet mask. E.g. 255.255.255.0, 255.255.127.0, 255.255.0.0

How many times computer reboot when server 2000 install?

2 times.

How will you remove this error “ ntldr missing press any key to reboot the system” ?

Reboot the system with XP, ( apply also on server2003,) cd
On setup screen press to R to repair the window
Now provide the administrator password
C:\>cd f:( your cd drive latter, f is taken as the example )
f:\>cd i386
f:\>copy ntldr c:\
f:\>exit
reboot the system

Why do we do networking?

For data sharing
To accumulate hardware resource

What are the benefits of networking?

There are lots of advantages from build up a network, but the three big facts are-
File Sharing
From sharing files you can view, modify, and copy files stored on a different computer on the network just as easily as if they were stored on your computer.
Resource Sharing
Resources such as printers, fax machines, Storage Devices (HDD, FDD and CD Drives), Webcam, Scanners, Modem and many more devices can be shared.
Program Sharing
Just as you can share files on a network, you can often also share program on a network. For example, if you have the right type of software license, you can have a shared copy of Microsoft Office, or some other program, and keep it on the network server, from where it is also run

What is network?

A network is basically all of the components (hardware and software) involved in connecting computers across small and large distances.

What is networking?

A process that is describes how the network will connect.

What is topology?

A topology defines how the devices are connected. Further it is divided in physical and logical topology.

What is difference between physical and logical topology?

A physical topology describes how devices are physically cabled together.
A logical topology describes how devices communicate across the physical topology

How many types of topology are available?

A point-to-point topology has a single connection between two devices.
In a star topology, a central device has many point-to-point connections to other devices.
A bus topology uses a single connection or wire to connect all devices.
In a ring topology, device one connects to device two, device two connects to device three, and so on to the last device, which connects back to device one.

Networking Basic Interview Questions and answer

How to find what program used as default for opening file .xyz ?

In cmd type C:\> assoc .xyz which program will open that .xyz file

How to change settings in command prompt?

How to start DirectX Diagnostic Tool ?

To start the DirectX Diagnostic Tool: 1. Click Start, and then click Run.
In the Open box, type dxdiag and then click OK.

How to determine whether there is an issue with the DNS configuration of your connection to your ISP?

At a command prompt, type ipconfig /all and then press ENTER to display the IP address of your DNS server. If the IP address for your DNS server does not appear, you need contact your ISP.

What do you need to do that your browser will point URL www.example.com to the internal IP address 127.99.11.01?

Make changes in the hosts file in C:\WINDOWS\system32\drivers\etc
The Hosts file is looked at first before going out to the DNS (Domain Name Service) servers. you have to put the following on new lines at the end of hosts file:
127.99.11.01 example.com
127.99.11.01 www.example.com

What can you suggest to enhance testing process on windows OS?

Put shortcut to notepad.exe in SendTo folder. It is speed up work with different files like hosts, configuration files. Location of this folder is
C:\Documents and Settings\Default User\sendto.
Open it and create shortcut of notpad.exe

What is FTP?

FTP is short for File Transfer Protocol. This is the protocol used for file transfer over the Internet.

How will you make XP home the client of server 2003?

XP home edition is made only for home purpose so we can’t use it as the client. And same rule apply on windows vista editions also.

Where do you take back up from?

Click Start, point to All Programs, point to Accessories, point to System Tools, and then click Backup.
Bedside's it?
If OS support then Select Drive ==> properties ==> back up now

What is router?

Router is a device that is used to connect two different networks.

How will you configure ADS?

Start ==> Run ==> DCPROMO
Or
Start==> Configure your server ==> add/Remove a Role

What is ADS?

A central component of the Windows platform, Active Directory service provides the means to manage the identities and relationships that make up network environments.

What if this wizard (ADS) is not running?

Check the network cable it should be plugged
Check root partition it should be in NTFS
Check IP of server it should be configured statically

How will you add a client to server? /
How’s the client join a domain?
What are the client configurations?

On Server
Configure ADS (for example it’s configured with xyz.com)
On Client
Log in form local administrator account
My Computer ==> Properties ==> Computer Name ==> Change
==>Domain ==>xyz.com ==> username Administrator (of xyz.com)
Password xxxxxxxxxxx (of admin of xyz.com)
Welcome to xyz.com ==> Restart the computer

Does it necessary to use administrator account to configure the client?

Not every time but you are required a properly configured user account in domain controller security policy.

ISO stand for?

International standard organization

OSI stand for?

Open System Interconnection

What is full form DHCP and how will you configure it?

Dynamic host configuration protocol

To configure it on Server
Configure your server ==>Add/Remove a role ==>DHCP server ==>complete the wizard
Start ==> Administrative tools ==> DHCP ==>New scope ==> Wizard
Now authorized this server and do activate it
On client
Local area network ==> tcp/ip ==> obtain ip automatically
Obtain DNS automatically

Pages

Friday, November 22, 2013

Interview Questions for Networking

No comments:

Post a Comment